Single Sampler Pinstripe Kit
Winners Cycle Graphics
Select a single style from the chart below...
Choose 1(scroll to choose)
Color
$23.99
SALE
PRICE:
This kit is great if you're not ready to purchase of one of the larger kits and just want to see
how a particular color or style will work on your bike. The kit comes with everything you need
to apply your decal selection: Preparation Fluid (orange label), Application Fluid (green label),
Vinyl Squeegee, Lint-Free Towels, and complete instructions. The size of the style in inches
and suggested uses follow below each style.
Please use the chart below to select the styles you want for your Custom Pinstripe Decal Kit.
Style 'D' has 3 designs;
the top one measures  
approx. 2 3/4" tall x 2 1/4"
wide. The bottom one is 2
1/4" tall x 1 1/2' wide.
They typically used on the
back fenders of bikes.
The middle design is
usually used on side
covers and measures 5
1/2" tall x 1" wide.
Style 'A' measures  
approx. 1 1/8" x 10 1/2".
It is typically used on the
front fender of bikes with
a thin fender and with a
lot of curve from side to
side. (The thin design
prevents buckling when
it wraps around the
fender's compound
curves.)
Style 'C' measures  
approx. 1 1/2" x 10".
It is typically used on the
front fender of bikes with
a wide fender which is
relatively flat, like the
Harley Road King. It can
also be used on the
center of a tank if there
is no console.
Style 'B' is a two piece  
design which when put
together measures  
approx. 1 " x 20".
It is typically used on the
front fender of bikes with
a thin fender and with a
lot of curve from side to
side. (The individual
elements can also be
used separately.)
Style 'H' has 2 designs;
together they measure
approx. 8" tall x 3" wide.
They can be used on a
wide, flat front fender but
is usually works best on
either side of a rear
fender, side covers or oil
tank / battery box.
Style 'E' measures  
approx. 2 1/2" x 10 1/2".
It is typically used on the
front fender of bikes with
a wide, flat fender. It also
has a great many uses
when spit in two and
used on either side of a
tank console.
Style 'G' measures  
approx. 2 1/8" x 10 3/4".
It is typically used on the
top or side of hard
saddle bags. It can also
be used on the center of
a tank if there is no
console or on a medium
front fender.
Style 'F' measures  
approx. 1 3/4" x 10 3/4".
It is typically used on the
front fender of bikes with
a medium width fender. It
can also be used on
either side of a tank
console or as an accent
under a  tank side logo.
Style 'L' has 2 designs;
they each measure  
approx. 5 1/2" tall x 1 1/2"
wide. They are typically
used on side covers, oil
tanks or wherever a
small accent is needed.
Style 'I' measures  
approx. 1 3/4"W x 9T".
It is typically used as an
accent under tank
emblems or wherever a
medium sized accent is
needed.
Style 'K' measures  
approx. 1 3/4"W x 9"T.
It is typically used on the
front fender of bikes with
a medium fender width,
like the Harley Softail
Standard. It can also be
used on either side of a
tank console.
Style 'J'  measures approx
2 1/2W " x 10 1/2".
It is typically split and used
on either side of a tank
console.
Style 'M' measures  
approx. 3"wide x 9"tall.
It is typically used on the
top of a gas tank when
spit in two and used on
either side of a tank
console.
Style 'O' measures  
approx. 2 1/2"wide x 10
1/2"high. It is typically
used on the top of a gas
tank when spit in two
and used on either side
of a tank console.
Style 'N' measures  
approx. 4"Wide x 11 1/4"
Wide. It is typically used
on the sides of a gas
tank. It can also be used
on either side of a tank
console or to wrap
around a center gas cap
on the top of a tank.
Style 'S' has 2 designs;
the top one measures  
approx. 8" tall x 2 3/4"
wide. It  usually works
best on either side of a
side cover or oil tank. The
bottom design is 2" x 4"
and is for a rear fender.
Style 'P' measures  
approx. 1 1/4"wide x
10 3/4"high. It is typically
used on the front fender
of bikes with a narrow
fender. It is often used in
combination with style Q.
Style 'R' measures  
approx. 2 1/2"high x 10
3/4"wide. It is typically
used on the back of a
tour pack (travel trunk)
or on the front of a fairing
Style 'Q' measures  
approx. 1 3/4" x 11 1/4".
It is typically used on the
center of the gas tank on
bikes with 2 filler necks
and no center console.
Style 'W' measures  
approx. 10 1/2" tall x
2 1/2" wide. This design
is typically split and used
on either side of a rear
fender on the vertical
portion.
Style 'V' measures  
approx. 3 1/2" wide x 11"
tall. It is typically used on
the either side of a tank
console. It can also be
used on the top or sides
of hard saddle bags.
Style 'U'  measures
approx 3" wide x 9" tall.
It is typically split and used
on either side of big
cruiser front fender, like
an Electra Glide or Road
King.
Style 'T' has 2 designs;
the top one measures  
approx. 7" tall x 2 1/2"
wide. It  usually works
best on either side of a
side cover or oil tank. The
bottom design is 1 3/4" x
3 1/2" and is normally
used on a rear fender.
Click here to go
BACK to
Custom Kits
Page
Style 'X' measures  
approx. 2 1/4" wide  x 9"
tall. It is typically used on  
either side of the rear
fender on medium sized
bikes.
Style 'Z' measures  
approx. 2" wide x 11 "
high. It is typically used
on the front fender of
bikes with a medium
width fender. It can also
be used on either side of
a tank console or as an
accent under a  tank side
logo
Style 'Y' measures  
approx. 2" wide x 11 1/4"
high. It is typically used
on the front fender of
bikes with a medium
width fender. It can also
be used on either side of
a tank console or as an
accent under a  tank side
logo.
© WCG 2017